Denali CANsmart­­™ Controller - Harley Davidson Pan America

Discover the power of seamless accessory control with the Denali CANsmart™ Controller GEN II for Harley-Davidson Pan America. Packed with intelligent features, this cutting-edge controller provides plug & play connection for aftermarket and original Harley-Davidson accessories, enabling you to fine-tune your ride to perfection.

By simply connecting the CANsmart™ to your Harley-Davidson diagnostic port, you gain access to over 35 programmable accessory settings. These features enable intelligent control of auxiliary lights, horns, brake lights, and any other accessory, ensuring your bike suits your needs perfectly. With four electronically fused accessory circuits providing up to 25 peak amps (10 amps continuous), you'll have all the power you need for even the most demanding accessories.

The CANsmart™ isn't just about power; it's also about enhancing your riding experience. Features like High/Low Sync, ON/OFF and Dim, Modulate Lights, Flash to Pass, and Cancel With Turn Signal allow you to efficiently control your auxiliary lights, enhancing your visibility to other motorists. Inverse Flashing With Hazards boosts your visibility during roadside emergencies, while the Plug & Play Horn Installation feature simplifies the installation of high-power aftermarket horns like the SoundBomb™.

Features like Strobe with Horn, Deceleration Activated "Smart Brake" Technology, Flash Pattern Braking, Circuit Function Selector, Switched Power Source, Delay Time Out, and On Board Power give you even more customization options, tailoring your ride to your exact specifications.

Don't settle for a stock ride; make your Harley-Davidson Pan America uniquely yours with the CANsmart™ Controller GEN II. Ideal for both daily commuting and exploring open roads, the CANsmart™ helps you get the most out of your motorcycle.

Please note: This CANsmart H-D Pan America is exclusively for the Pan America model. For non-Pan America models, please select the standard Harley Davidson CANsmart Controller.

Features:

• High/Low Sync: Configure passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim: Independently control two sets of lights ON/OFF and intensity level from your bike's factory trip switch.
• Modulate Lights: Set your passing lamps or auxiliary lights to modulate, enhancing your visibility to other motorists.
• Flash to Pass: Quickly grab attention by pulsing your high beam switch, causing your auxiliary lights to strobe.
• Plug & Play Horn Installation: Connect high-power aftermarket horns like our SoundBomb with ease and without additional harnesses or relays.
• Strobe with Horn: Have your passing lamps or auxiliary lights automatically strobe when you sound your horn.
• Deceleration Activated "Smart Brake" Technology: Activate your brake light during deceleration even before you touch the brake. The sensitivity and minimum speed for this feature can be adjusted.
• Flash Pattern Braking: Choose from four different flash patterns to make your auxiliary brake lights more noticeable.
• Switched Power Source: Provides clean switched 12V power, enabling any accessory connected to this circuit to turn on and off with your ignition.
• Delay Time Out: Keep your accessories powered for up to 30 seconds after you turn off your bike.
• On-Board Power: Ideal for powering your GPS, phone, heated gear, or any other electronic device.

Whats In The Box?

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• Zip-ties
• Adhesive Hook-and-Loop Fastener
• Micro USB Programming Cable